Complete Beginner’s Guide: Flashing the HUAWEI Y520-U22 Using SP Flash Tool + Fix IMEI

Complete Beginner’s Guide: Flashing the HUAWEI Y520-U22 Using SP Flash Tool

If you’re new to flashing and facing issues with your HUAWEI Y520-U22, this step-by-step guide is for you. Whether your phone is stuck on the logo or has software problems that can’t be fixed with a factory reset, flashing a clean ROM is often the best solution.

In this tutorial, I’ll Walk you through the process to flash your HUAWEI Y520-U22 and even repair the IMEI if necessary. Let’s get started!

Common Issue: Stuck on Logo or Software Problems

If your phone is hanging on the startup logo or experiencing persistent issues like viruses or corrupted files, a simple factory reset may not work. In such cases, flashing the phone with SP Flash Tool and a clean ROM is the way to go.

What You’ll Need

1. Firmware File: Download a 100% working firmware specific to the HUAWEI Y520-U22. [Download it here].
2. SP Flash Tool: A powerful tool to flash MediaTek-based devices.
3. USB Drivers: Ensure your computer can detect your phone in flash mode.
4. Windows PC: The SP Flash Tool works on Windows systems.
5. USB Cable: Use a reliable cable to avoid connection interruptions.

Step-by-Step Flashing Guide

Step 1: Download and Extract the Firmware

1. Download the firmware specific to your HUAWEI Y520-U22 from a trusted source.
2. Extract the downloaded file to a folder on your computer. Ensure you can locate the scatter.txt file inside the extracted folder.

Step 2: Launch SP Flash Tool

1. Open the SP Flash Tool on your PC.
2. Click on the Scatter-loading File option and select the scatter.txt file from the firmware folder you extracted earlier.

Step 3: Choose Flash Mode

1. To install a clean ROM, select the Format All + Download option.
2. This ensures that all old data and system files are wiped, replacing them with the new firmware.

Step 4: Prepare Your Phone

1. Turn off your HUAWEI Y520-U22 completely.
2. Remove the battery from the device.
3. Note down the IMEI numbers written on the back of the phone (you’ll need these later to repair the IMEI).

Step 5: Connect Your Phone

1. Insert the battery back into the phone.
2. Hold the Volume Down (-) button and connect the phone to your PC using a USB cable.
3. Ensure your device is detected under Ports in Computer Management (check in Device Manager).

Step 6: Begin Flashing

1. Once the SP Flash Tool is ready, click the Download button.
2. The flashing process will begin, and you’ll see a progress bar.
3. Wait patiently until the process completes. You’ll see a green checkmark on the SP Flash Tool when it’s done.

Step 7: Final Steps

1. Disconnect the USB cable and turn on your device.
2. Wait for the initial boot-up (this may take a few minutes).
3. Your device should now be working with a fresh ROM.

After Flashing: IMEI Repair

Once flashing is complete, check your IMEI by dialing *#06#. If the IMEI numbers are missing or show as invalid, you’ll need to repair them.

How to Repair IMEI on HUAWEI Y520-U22

1. Use the IMEI repair method provided in this detailed method on this tutorial this LINK HERE
2. Follow the instructions carefully to restore your IMEI numbers.

Troubleshooting Tips

• Device Not Detected: Install the necessary USB drivers and retry.
• Flashing Fails Midway: Check your USB cable, firmware file, and connection stability.
• Phone Still Stuck on Logo: Perform a factory reset in recovery mode and repeat the flashing process.

With this guide, even beginners can confidently flash their HUAWEI Y520-U22 and bring their device back to life. If this helped you, don’t forget to share it!

Happy flashing!