Main Menu

Pages

Dead Lenovo A319 repair with IMEI fixed

+Font size-

Dead Lenovo A319 repair with IMEI fixed

Dead Lenovo A319 repair with IMEI fixed

This tutorial is for beginners who do not have any experience in flashing Lenovo A319.

Important Disclaimer

Rooting is a powerful tool, but it’s not for the faint-hearted. It voids your warranty and may lead to permanent damage if mishandled. Ensure you’ve backed up all your important data before starting.

How to flash:

  • Download the flash file that works 100% with me from here.
  • Extract the downloaded file.
  • Open flash tools and select (MT6572_Android_scatter.txt) file
Dead Lenovo A319 repair with IMEI fixed
  • To flash a clean ROM, select the (Format All + Download) option on the smart flash tools.
Dead Lenovo A319 repair with IMEI fixed
  • Turn off your phone, remove the battery, and write down the device's two IMEI numbers found on the back of the phone (you will need to repair the IMEI after flashing).
Dead Lenovo A319 repair with IMEI fixed
  • the flash tools are ready, put the battery back in.
  • Press the volume down button, then connect the USB cable (you must see the driver under ports in computer management).
  • Wait for the process to fully complete, and you will see a checkmark appear.
Dead Lenovo A319 repair with IMEI fixed
  • Remove the USB cable and turn on your device; wait until it completes and opens properly.

ٍA319 IMEI Repair:

Dead Lenovo A319 repair with IMEI fixed
  • Select USB VCOM=> on Comport, Smart Phone=> at Target type
  • Press system config and select (IMEI=> at Write option / Dual IMEI=> at IMEI option)
  • Press MD1_DB and select file (BPLGUInfoCustomAppSrcP_MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P2_1_wg_n) - located in the extracted flash file.
  • Press AP_DB and select APDB_MT6572_S01_KK1.MP7
  • Close this screen and return to the main program.
  • Press start and then connect USB to switched off device.
  • Wait until you see a green (PASS) message.
  • Turn on your device, and everything should be working well with the IMEI repaired. (open dial app and write *#06#) to verify.

Acknowledgment

If this guide helped you, a shoutout to Yassien Technology would be greatly appreciated!

  • facebook
  • pinterest
  • twitter
  • whatsapp
  • LinkedIn
  • Email
author-img
Unknown

Show Comments
  • Normal Comment
  • advanced comment
  • Sort by latest
    Through the editor below, you can add an advanced comment as a comment to an image, a YouTube video, a code or a quote. Just enter the code or text for the quote or a link to an image or YouTube video, then press the button below to convert, copy the result and use it to comment
  1. Anonymous12/5/17

    i keep getting this error.
    SmartPhoneSN::ConnectWithPreloader(): Get dynamic preloader comport timeout...

    ReplyDelete
  2. Does it appear when flash software or when fix IMEI??

    If when flash Load all flash files including preloader file, and check format all.

    ReplyDelete
  3. problem ConnectWithPreloader (): Obtenez un pré-chargeur dynamique avec timeout Réparation IMEI

    ReplyDelete
  4. When it show timeout, just disconnect usb and remove battery, reback it again and connect when device is shutting down

    ReplyDelete

Please Leave Your Comments here......!!!!!