How to Flash Your Dead Lenovo Tab 2 A7-30HC (Step-by-Step Guide) with Stock Firmware Black & White

How to Flash Your Dead Lenovo Tab 2 A7-30HC (Step-by-Step Guide)

If your Lenovo Tab 2 A7-30HC tablet is dead or experiencing issues, flashing the correct ROM is the solution. This guide will provide step-by-step instructions to help you revive your device. Follow carefully to ensure a successful flash process.

---

Why Flash Your Tablet?

Flashing your tablet might be necessary in the following scenarios:

• The tablet is completely dead and not turning on.
• To remove software bugs or viruses.
• To upgrade or reinstall the system software.

---

Stock Firmware Downloads

Make sure you download the exact firmware for your tablet’s model and color.

• Black Variant:
  Lenovo Tab 2 A7-30HC Black Firmware – A7-30HC_S126_150824_ROW

• White Variant:
  Lenovo Tab 2 A7-30HC White Firmware – A7-30HC_S0029_151021_ROW

---

Tools Required

1. SP Flash Tool – Download and install the SP Flash Tool.
2. USB Drivers – Ensure proper drivers for your tablet are installed on your PC.
3. Firmware – Use the links above to download the appropriate stock firmware.
4. USB Cable – A reliable USB cable to connect the tablet to the PC.

---

Flashing Scenarios

Scenario 1: If the Tablet is Working (Reflash or Upgrade)

1. Download and extract the stock firmware for your model.
2. Open SP Flash Tool on your PC.
3. Load the scatter file from the extracted firmware.
4. Select the option "Download Only" in SP Flash Tool.
5. Turn off your tablet and press VOL- while connecting the USB cable.
6. Wait for SP Flash Tool to detect the device and start the flashing process.

---

Scenario 2: If the Tablet is Dead (Doesn’t Turn On)

Method 1: Without Battery

1. Open the tablet’s back cover and disconnect the battery.
2. Connect the tablet to your PC using the USB cable.
3. In SP Flash Tool, select "Format All + Download".
4. Click Download in SP Flash Tool to start the process.
5. Once the process starts, reconnect the battery while the flashing continues.

Method 2: With Battery

1. Connect the tablet to your PC using the USB cable.
2. Press and hold VOL- and Power simultaneously until SP Flash Tool detects the device.
3. Click Download to begin the flashing process.

---

Step-by-Step Flashing Process

1. Extract Firmware: Unzip the downloaded stock firmware file to a folder.
2. Launch SP Flash Tool: Open the tool and load the scatter file from the firmware folder.
3. Select Flashing Mode: Choose "Format All + Download" for a fresh installation.
4. Connect Device: Use either the With Battery or Without Battery method as described above.
5. Start Flashing: Click the Download button in SP Flash Tool.
6. Wait for Completion: The process will finish when you see a green checkmark.

---

Final Steps

After flashing, disconnect the tablet and power it on. The device should boot up normally with a fresh firmware installation. If IMEI issues arise, you may need to repair it using a specialized tool.

---

Important Notes

• Ensure you use the correct firmware for your tablet model and color.
• Backup your data before flashing (if possible).
• Flashing incorrectly can permanently damage your device—proceed with caution.

---

Conclusion

By following this guide, you can successfully flash your Lenovo Tab 2 A7-30HC tablet and revive it from a dead or problematic state. If you encounter any issues, feel free to leave a comment or contact support.

For more tutorials and updates, follow Yassien Technology on Facebook!