This tutorial is for beginners who do not have any experience with flashing.
HUAWEI Y221-U22
Important Disclaimer
Rooting is a powerful tool, but it’s not for the faint-hearted. It voids your warranty and may lead to permanent damage if mishandled. Ensure you’ve backed up all your important data before starting.
Please read this before you start
How to flash:
- Download flash file working 100% with me.
- Extract downloaded file.
- Open flash tools and select (MT6572_Android_scatter.txt) file
- To flash a clean ROM, select the "Format All + Download" option on Smart Flash Tools.
- Turn off, remove the battery, and note two IMEI numbers written on the back of the device.
- When the flash tools are ready, insert the battery pack.
- Press volume down, then connect USB. (You must see the driver under in computer management).
- Wait until it is fully completed, and you will see check appear.
- Remove the USB and turn on device. Wait until process is complete and open it
Y221-U22 IMEI Repair:
Method One:
- Turn off your device again.
- Download SN Write Tool v2.1444.00, Extract, and open SN Writer.exe
- Select USB VCOM=> on Comport, Smart Phone=> at Target type
- Press system config and select (IMEI=> at Write option / Dual IMEI=> at IMEI option)
- Press MD1_DB and select file (BPLGUInfoCustomAppSrcP_MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P2_1_wg_n) - located at extracted flash file.
- Press AP_DB and select APDB_MT6572_S01_KK1.MP7
- Close this screen, return to main program.
- Press start and then connect USB to switched off device.
- Wait until you see a green (PASS)
- Turn on your device, and everything should be working well with the IMEI repaired. (Dial *#06# to check).
Method Two:
If the first method does not work with you follow this method working 1000%Acknowledgment
If this guide helped you, a shoutout to Yassien Technology would be greatly appreciated!
Comments: (0) Add comment
Please Leave Your Comments here......!!!!!