Dead Lenovo A319 repair with IMEI fixed


Dead Lenovo A319 repair with IMEI fixed


Dead Lenovo A319 repair with IMEI fixed

This tutorial is for beginner who hasn't an experience to flash Lenovo A319


How to flash:

1 - Download flash file working 100% with me from here.

2 - Extract downloaded file.

3 - Open flash tools and select (MT6572_Android_scatter.txt) file



4 - To flash a clean ROM, So select (Format t All+ Download) option on smart flash tools.



5 - Turn off your phone, remove battery, write device 2 IMEI numbers written on the back of phone.

(you will need to repair IMEI after flash)



6- When flash tools is ready get in battery back

7- Press vol - then connect usb. (must see driver under ports on computer management).

8- Wait to fully complete and you will see right mark appears.



9- Remove USB and turn on your device, wait until complete and open well


------------------------------------------------------------------------------------------------------
A319 IMEI Repair:

10- Turn off ur device again 

11- Download SN Write Tool v2.1444.00, Extract, and open SN Writer.exe




12- Select USB VCOM=> on Comport, Smart Phone=> at Target type

13- Press system config and select (IMEI=> at Write option / Dual IMEI=> at IMEI option)

14- Press MD1_DB and select file (BPLGUInfoCustomAppSrcP_MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P2_1_wg_n)  - located at extracted flash file.

15- Press AP_DB and select APDB_MT6572_S01_KK1.MP7

16- Close this screen, return to main program.

17- Press start and then connect USB to switched off device.

18- Wait until you see a green (PASS)

19- Turn on your device and all is working well with IMEI repaired. (press on dial *#06#)
.



Previous
Next Post »
4 Komentar
avatar

i keep getting this error.
SmartPhoneSN::ConnectWithPreloader(): Get dynamic preloader comport timeout...

Balas
avatar

Does it appear when flash software or when fix IMEI??

If when flash Load all flash files including preloader file, and check format all.

Balas
avatar

problem ConnectWithPreloader (): Obtenez un pré-chargeur dynamique avec timeout Réparation IMEI

Balas
avatar

When it show timeout, just disconnect usb and remove battery, reback it again and connect when device is shutting down

Balas

Please Leave Your Comments here......!!!!!