How to Root Lenovo Vibe P1 on Android M 6.0.1 (Complete Guide)

How to Root Lenovo Vibe P1 on Android M 6.0.1 (Complete Guide)

Rooting your Lenovo Vibe P1 running Android Marshmallow (6.0.1) requires following detailed steps. This tutorial will guide you through the entire process, ensuring you root your device successfully. Rooting allows you to unlock your phone’s full potential but proceed with caution and at your own risk.

---

Prerequisites and Downloads

Files to Download:

Ensure you download and install the following files on your PC:

• Vcredist_x86.zip
• QPST_2.7.422.ZIP
• Qualcomm_USB_Drivers.zip
• P1a42_S272_160506_ROW_QPST ROM

---

Step 1: Install Necessary Drivers

1. Install Drivers: Extract and install the Qualcomm USB Drivers.
2. Connect Your Phone: Turn off your Lenovo Vibe P1, then press and hold VOL+ while connecting the USB cable to your PC.
3. Verify Driver Installation:
4. Open the Device Manager on your PC.
5. Confirm that your phone appears as Qualcomm Lenovo HS-USB QDLoader 9008 under COM & LPT Ports.
6. If the driver is correctly installed, you’re ready to proceed.

---

Step 2: Flash the Stock ROM

1. Install QPST Tool: Install QPST_2.7.422 on your PC.
2. Open the Tool: Launch QPST and ensure your phone is detected.
3. Select Port: If the port is not automatically selected, click Select Port and choose *Qualcomm Lenovo HS-USB QDLoader 9008 (COM)**.
4. Load Firmware Files:
5. Click Browse next to Programmer Patch and select the prog_emmc_firehose_89.mbn file from the extracted ROM folder.
6. Click Load XML and select rawprogram0.xml, then choose patch0.xml.
7. Flash the ROM: Press Download to start the flashing process. Wait for it to complete.
8. Restart the Device: If the phone doesn’t restart automatically, press and hold Volume UP + Power for 10–15 seconds.

---

Step 3: Flash Recovery and Unlock Bootloader

If your device is on an updated ROM like S286, you need to downgrade to S272 before proceeding.

Flashing Bootloader Unlock File:

1. In QPST, replace rawprogram0.xml with rawprogram_unlock.xml.
2. Flash the unlock file and wait for the phone to reboot.

Enable OEM Unlock:

1. Go to Developer Options in your phone’s Settings and enable OEM Unlock.
2. If the phone remains locked, open CMD on your PC and type: (fastboot oem unlock-go)

Flash TWRP Recovery:

1. In QPST, replace rawprogram0.xml with rawprogram_twrp.xml.
2. Flash the TWRP recovery file.
3. After flashing, reboot the device into recovery mode by pressing Volume UP + Volume DOWN + Power simultaneously.

---

Step 4: Install SuperSU for Root Access

1. Download SuperSU: Get the latest version of SuperSU Root File.
2. Transfer to SD Card: Copy the SuperSU ZIP file to your phone’s external storage (SD card).
3. Boot into Recovery: Reboot your phone into TWRP recovery mode.
4. Flash SuperSU: In TWRP, select the SuperSU ZIP file and install it.
5. Reboot: Once the installation is complete, reboot your phone.

---

Final Notes

• Rooting may void your warranty. Ensure you understand the risks before proceeding.
• Always backup your data before attempting any modifications.
• If you encounter issues, retrace your steps and verify each one.

---

Conclusion

Congratulations! You’ve successfully rooted your Lenovo Vibe P1 on Android 6.0.1. Enjoy the freedom and customization that comes with rooting. For any questions or issues, feel free to leave a comment.

Follow Yassien Technology for more tutorials and updates.